I. Product Overview pre-filter filter element is generally used in power plant condensate treatment systems, filters installed inside the filter element, filter element surface can be used to fiber powder and resin powder laying yin and yang in order to achieve filtration and desalination purposes, when the filter When the import and export of water pressure or conductivity of the filter or silicon reaches the set value, the filter is a failed state, it will be explosive membrane filter and backwash, and then to put into operation after laying. I produced the wound filter element calculation parameters used in all computers arranged evenly between the control line and the line, fully able to ensure that the overall performance of products, coupled with the use of 304 stainless steel porous support tube, which can withstand high strength resin film and anti-explosion washing process produces an instant high impact, and to ensure the filter element is not deformed, polypropylene fiber material does not come off, so that condensate treatment system operating safety be guaranteed. Second, product characteristics ● continuous polypropylene fiber cord wound filter element, filter element parametric arranged by computer to ensure the overall performance of the product; ● full length uniform filter / resin coated filter; ● All stainless steel pipe and threaded interfaces Center connectors; ● backwash operation is used specially designed; high interception capacity ● full length; ● powder for various uses resin filter / pre-filter filter element with different sizes; ● Install this filter per device single large output, small footprint, ease of main plant layout; ● system is simple, there is no pollution of acid consumption and regeneration of waste acid, waste is easy to handle, is conducive to environmental protection; ● low investment costs, condensation pressure loss before and after polishing. Project LD-CRLY-60 "filter element LD-CRLY-70" filter element LD-CRLY-80 "polypropylene fiber filter element media 304,304,304 bottom polypropylene fiber polypropylene fiber reinforcing material structure M33 × 1.5 connecting thread M33 × 1.5 connecting thread G1 "connecting thread M6 threaded M8 threaded top structure 10 thread diameter Ф28mm Ф28mm Ф28mm Ф50mm Ф50mm Ф50 mm outside diameter filter accuracy 5μm 5μm 5μm filter element length 1518mm 1778 mm 2009mm maximum recommended flow rate 8 ~ 9m3 / h / root 8 ~ 9m3 / h / root 8.3 m3 / h / root recommended maximum pressure 2.45kg/cm2 2.45kg/cm2 2.45kg/cm2 maximum operating temperature of 85 ℃ 85 ℃ 85 ℃